Aruba Networks JL823A#ABA Switches & Bridges Hpe Flexnetwork 5140 24g Poe+2sfp+2xgt Ei Switch - 26 Ports - Manageable - Gigabit Ethernet, 10 Giga Jl823aaba 190017497853
New Listing!

Part Number: JL823A#ABA
Condition: New
In Stock: Out of stock   
Real time availability   

Notify Me


Regular:$6,550.00
Save:$1,575.34 (24%)

Your Price:
$4,974.66

As low as $456/month
Buy Now, Pay Later




Square Trade
  • Shipping Insurance
  • Price Match Guarantee
  • Terms of Service Guarantee
  • Identity Theft Protection
FREE with your purchase
https://www.compsource.com/mscs_images/authors/DeanBW 1.jpg
Let our Specialist make your purchase easier

Product Specifications



HPE FlexNetwork 5140 24G PoE+2SFP+2XGT EI Switch - 26 Ports - Manageable - Gigabit Ethernet, 10 Gigabit Ethernet - 10/100/1000Base-T, 10GBase-X, 10GBase-T - 3 Layer Supported - Modular - 24.50 W Power Consumption - 370 W PoE Budget - Optical Fiber, T JL823A#ABA

HPE 5140 24G POE+ 2SFP+ 2XGT - EI SW US English PL-34

Manufacturer Part Number: JL823A#ABA



HPE Networking Comware Switch 24G POE+2SFP+2XGT 5140 EI

The HPE Networking Comware Switch Series 5140 EI delivers scalability, high availability, and low TCO at the access layer of medium and large enterprise campus networks. The series offers enterprise-class QoS and security, HPE Intelligent Resilient Fabric (IRF) stacking, static layer 3 routing and RIP; convenient fixed 10GbE uplink ports, PoE+, ACLs, and IPv6; and delivers energy savings with Energy Efficient Ethernet. The HPE Networking Comware Switch Series 5140 EI also includes Smart Management Center (SmartMC), an embedded network management tool that can be leveraged at no additional cost by small and medium networks for centralized management and operations. The series can also be managed with HPE Aruba Networking IMC for a single view of your entire network.
HPE Networking Comware Switch 24G POE+2SFP+2XGT 5140 EI
Gigabit Ethernet access switch with static layer 3 routing, RIP, high density 10GbE uplinks, and POE+ models for voice, video, and wireless.
Supports IRF technology that enables plug-and-play device aggregation and link aggregation across multiple devices, enhancing network redundancy and resource utilization.
Includes embedded network management capabilities with Smart Management Center (SmartMC).
Includes energy-saving green design features such as automatic switching of idle ports to energy-saving mode and powering down unused ports.

Scalability and High Availability

  • The HPE Networking Comware Switch Series 5140 EI delivers scalability and enhances reliability of the network with HPE Intelligent Resilient Framework (IRF) technology. IRF stacking enables virtual resilient switching fabrics, where two or more switches perform as a single L2 switch and L3 router.
  • HPE IRF stacking enhances performance and reliability with uninterrupted L2 switching and L3 forwarding and reduces operational complexity with simpler, flatter, and more agile networks.
  • Four fixed uplinks (SFP, SFP+, and 10GBASE-T) deliver performance for bandwidth intensive applications.
  • Link redundancy with support for protocols such as Spanning Tree/MSTP, RSTP, and Smart link provides high availability.

Comprehensive Security Control

  • The HPE Networking Comware Switch Series 5140 EI supports flexible authentication methods including 802.1X and MAC Authentication for greater security and policy-driven application authentication. Per-user access control lists (ACLs) provide identity-driven security and access control.
  • ACLs provide IP Layer 2 to Layer 4 traffic filtering while supporting global ACL, VLAN ACL, port ACL, and IPv6 ACL.
  • Dynamic ARP protection with functions such as ARP Detection and ARP packet validation that block broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data.
  • Centralized security policy management and network protection with HPE Aruba Networking IMC End User Admission Domination (EAD) which integrates security policies, network access control, and access right control policies to form a cooperative security system.
  • Enhance security with encryption of access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3, and other features including DHCP protection, IP source guard, and RADIUS/HWTACAS.

Simplified Management

  • The HPE Networking Comware Switch Series 5140 EI can be seamlessly managed with HPE  Aruba Networking IMC to provide end-to-end network transparency with a consistent network experience through comprehensive configuration, compliance, and policy management.
  • Supports SmartMC, an embedded network management tool with a web-based GUI to simplify operations and facilitate centralized management. It offers features such as configuration backup, software version management and seamless switch replacement.
  • RMON and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events.

Enhanced Quality of Service

  • The HPE Networking Comware Switch Series 5140 EI supports advanced classifier-based QoS which groups traffic using multiple match criteria based on Layer 2 and 3 information; it applies QoS policies such as setting priority level and rate limit to selected traffic on a port, VLAN, or entire switch.
  • Provides traffic prioritization with supported congestion actions include: strict priority (SP) queuing, weighted round robin (WRR), weighted random early detection (WRED), and SP+WRR and traffic policing with Committed Access Rate (CAR) and line rate.
  • Reduce unwanted network traffic with broadcast control and limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic.

CPN:HPE 5140 24G POE+ 2SFP+ 2XGT - EI SW US English PL-34
MANUFACTURER NAME: Aruba Networks
MANUFACTURER PART NUMBER: JL823A#ABA
UPC EAN CODE: 190017497853
LANGUAGE: EN
MARKET:US
Gigabit Ethernet access switch with static layer 3 routing, RIP, high density 10GbE uplinks, and POE+ models for voice, video, and wireless.
Supports IRF technology that enables plug-and-play device aggregation and link aggregation across multiple devices, enhancing network redundancy and resource utilization.
Includes embedded network management capabilities with Smart Management Center (SmartMC).
Includes energy-saving green design features such as automatic switching of idle ports to energy-saving mode and powering down unused ports.

Scalability and High Availability

  • The HPE Networking Comware Switch Series 5140 EI delivers scalability and enhances reliability of the network with HPE Intelligent Resilient Framework (IRF) technology. IRF stacking enables virtual resilient switching fabrics, where two or more switches perform as a single L2 switch and L3 router.
  • HPE IRF stacking enhances performance and reliability with uninterrupted L2 switching and L3 forwarding and reduces operational complexity with simpler, flatter, and more agile networks.
  • Four fixed uplinks (SFP, SFP+, and 10GBASE-T) deliver performance for bandwidth intensive applications.
  • Link redundancy with support for protocols such as Spanning Tree/MSTP, RSTP, and Smart link provides high availability.

Comprehensive Security Control

  • The HPE Networking Comware Switch Series 5140 EI supports flexible authentication methods including 802.1X and MAC Authentication for greater security and policy-driven application authentication. Per-user access control lists (ACLs) provide identity-driven security and access control.
  • ACLs provide IP Layer 2 to Layer 4 traffic filtering while supporting global ACL, VLAN ACL, port ACL, and IPv6 ACL.
  • Dynamic ARP protection with functions such as ARP Detection and ARP packet validation that block broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data.
  • Centralized security policy management and network protection with HPE Aruba Networking IMC End User Admission Domination (EAD) which integrates security policies, network access control, and access right control policies to form a cooperative security system.
  • Enhance security with encryption of access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3, and other features including DHCP protection, IP source guard, and RADIUS/HWTACAS.

Simplified Management

  • The HPE Networking Comware Switch Series 5140 EI can be seamlessly managed with HPE  Aruba Networking IMC to provide end-to-end network transparency with a consistent network experience through comprehensive configuration, compliance, and policy management.
  • Supports SmartMC, an embedded network management tool with a web-based GUI to simplify operations and facilitate centralized management. It offers features such as configuration backup, software version management and seamless switch replacement.
  • RMON and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events.

Enhanced Quality of Service

  • The HPE Networking Comware Switch Series 5140 EI supports advanced classifier-based QoS which groups traffic using multiple match criteria based on Layer 2 and 3 information; it applies QoS policies such as setting priority level and rate limit to selected traffic on a port, VLAN, or entire switch.
  • Provides traffic prioritization with supported congestion actions include: strict priority (SP) queuing, weighted round robin (WRR), weighted random early detection (WRED), and SP+WRR and traffic policing with Committed Access Rate (CAR) and line rate.
  • Reduce unwanted network traffic with broadcast control and limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic.
TechnicalSpecifications
Ports 24 RJ-45 autosensing 10/100/1000 ports
Duplex: Ports 1-24 support 10BASE-T/100BASE-TX, 1000BASE-T (full only)
2 SFP+ fixed 10GbE ports
2 x 1/2.5/5/10GBASE-T
1 RJ-45 serial console port
Memory and processor 512 MB SDRAM, 256 MB flash
Latency 1000 Mb latency: < 5 µs 10 Gbps latency: < 3 µs
Throughput 95 Mpps
Switching capacity 128 Gbps
PoE capability 370W PoE+ Maximum, depending on model
Routing capabilities Table Size: 1024 entries
MAC address: 16,384 entries IPv6 Ready Certified
Stacking capabilities IRF 9 switches
Management features HPE Aruba Networking IMC - Intelligent Management Center
SmartMC
Command-line interface
Web browser
SNMP manager
Power supply name 1 minimum power supply required (ordered separately)
Input voltage AC Voltage: 100 VAC–240 VAC
Power consumption 420W (Maximum), 24.5W (Idle) Note: Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE power is the power supplied by the internal power supply.
Heat dissipation Maximum: 83.6/1433 BTU/hr. (88.2/1511.9 kJ/hr.)
Product dimensions (imperial) 1.72 x 17.32 x 12.6 in
Weight 9.92 lbs

General Information:

HPE FlexNetwork 5140 EI Switch Series

The HPE FlexNetwork 5140 EI Switch Series comprises Gigabit Ethernet switches that support static, OSPF and RIP Layer 3 routing, convenient fixed 10GbE uplink ports, PoE+, ACLs, IPv6 and delivers energy savings with Energy Efficient Ethernet.

Unique Intelligent Resilient Fabric (IRF) technology creates a virtual fabric by managing several switches as one logical device, which increases network resilience, performance, and availability, while reducing operational complexity. These switches provide Gigabit Ethernet access and can be used at the edge of a network or to connect server clusters in small data centers.

High availability, simplified management, and comprehensive security control policies are among the key features that distinguish this series.

ManufacturerHewlett Packard Enterprise
Manufacturer Part NumberJL823A#ABA
Manufacturer Website Addresshttp://www.hpe.com
Brand NameHPE
Product LineFlexNetwork
Product Series5140 EI
Product Model5140 24G PoE+ 2SFP+ 2XGT EI
Product NameFlexNetwork 5140 24G PoE+2SFP+2XGT EI Switch
Product TypeLayer 3 Switch
  Product UPC190017497853
Interfaces/Ports:
Total Number of Network Ports26
Network (RJ-45)Yes
Uplink PortYes
ModularYes
Port/Expansion Slot Details24 x Gigabit Ethernet PoE+
2 x 10 Gigabit Ethernet Network
2 x 10 Gigabit Ethernet Expansion Slot
Media & Performance:
Media Type SupportedOptical Fiber
Twisted Pair
Ethernet TechnologyGigabit Ethernet
10 Gigabit Ethernet
Network Technology10/100/1000Base-T
10GBase-X
10GBase-T
I/O Expansions:
Total Number of Expansion Slots2.0
Expansion Slot TypeSFP+
Number of SFP+ Slots2
Network & Communication:
Layer Supported3
Networking StandardsIEEE 802.3
IEEE 802.3u
IEEE 802.3ab
IEEE 802.3x
IEEE 802.3at
IEEE 802.3ah
IEEE 802.1ab
IEEE 802.1x
IEEE 802.3af
IEEE 802.3az
IEEE 802.1Q
IEEE 802.1ad
IEEE 802.1ak
IEEE 802.1D
IEEE 802.1p
IEEE 802.1s
IEEE 802.1w
IEEE 802.3ac
IEEE 802.3ad
IEEE 802.3ae
IEEE 802.3i
IEEE 802.3z
Management & Protocols:
ManageableYes
Power Description:
PoE (RJ-45) PortYes
PoE Budget370 W
Input Voltage120 V AC
230 V AC
Power SourcePower Supply
Redundant Power Supply SupportedYes
Power Consumption24.50 W
Physical Characteristics:
Product ColorBlack
Compatible Rack Unit1U
Form FactorRack-mountable
Cabinet Mount
Height1.7"
Width17.3"
Depth12.6"
Weight (Approximate)9.92 lb
Miscellaneous:
What's in the box
  • FlexNetwork 5140 24G PoE+2SFP+2XGT EI Switch
  • Power Supply
  • Mounting Hardware
Environmentally FriendlyYes
Environmental ComplianceRestriction of Hazardous Substances (RoHS)
Waste Electrical and Electronic Equipment Directive (WEEE)
Warranty:
WarrantyLifetime

Date Inserted: Thursday December 12, 2024

This product was last updated on Sunday December 22, 2024

All products are brand new and factory sealed unless otherwise stated.
 *** Disclaimer- Information is supplied by the Manufacturer. The image, including color, may differ from actual product appearance. CompSource, Inc. is not responsible for data. ***

Questions and Answers

Questions and Answers

Ask CompSource

Shipping / Returns

Shipping

Ground = FREE
(Delivery within 2-7 business days)

Two Day Air = $30.00
(Delivery within 2 business days)

Standard One Day = $55.00
(Delivery within next business day)

Priority = $80.00
(Delivery within next business morning)

U.S Mail Priority (AA,AE,AP only) = $36.67

FedEx International Economy (Canada only) = $90.00

Typically out of stock items are filled within 1 to 14 business days but can and may take longer.

Shipping dates are best estimates based on product location and may vary with holidays.

If product requires trucking, additional fees may apply.

* Some destinations are subject to Applicable State/Duty Taxes

Returns

CompSource realizes that every product may have different return guidelines. Please see the policy below regarding this item.

This Product Has Limited Exchange Privileges.

Please call for return guidelines.

For support on this product, please contact Aruba Networks.


Aruba Networks Company's Information

Accessories

Product Reviews

Overall Rating | Write a Review

    Best Sellers
    More Best Sellers

    Recently Viewed

    Learn more about Switches & Bridges

    Network Switch Buying Guide

    Connect Multiple Devices to a Network and Route Data to Designated Devices

    What is a network switch and what does it do?

    NSUG24C2 ethernet switch

    Are there different types of network switches?

    There are two main types of network switches, unmanaged and managed. The essential difference is the capability to configure the operation of a managed switch to customize and optimize network traffic for specific applications.

    Unmanaged Switches

    Managed Switches

    Where do you place network switches?

    Network switches are usually placed on a desk or table, mounted on a wall, or mounted in a rack. CompSource offers unmanaged desktop switches (with metal or plastic housing) and both unmanaged and managed rack-mount switches with metal housing and a built-in PDU (Gigabit Ethernet Switch PDU Combos).

    What is a Gigabit Ethernet Switch PDU Combo?

    CompSource offers an exclusive line of unmanaged and managed Gigabit Ethernet switches that have Power over Ethernet (PoE).

    1U gigabit ethernet switch pdu combo

    Factors to Consider

    Does your application require a managed switch?

    If your application involves controlling network traffic, you will need the features of a managed switch. The following are some examples of tasks that require a managed switch:

    • Controlling access between departments within your LAN
    • Running many bandwidth-intensive applications simultaneously
    • Giving important data greater priority in your LAN
    • Improving the performance of a busy network
    • Implementing VoIP, wireless LANs or other advanced services

    How many devices do you need to connect to your network?

    Make sure you select a switch with enough Gigabit (10/100/1000 Mbps) Ethernet ports for the devices you want to connect to your network. If you think you'll add more devices in the future, choose a switch that will give your network room to grow.

    how many devices do you need to connect to your network

    Do you need to connect multiple network switches?

    If you plan to connect multiple network switches, look for models with SFP uplink ports (also known as Mini-GBIC ports). SFP uplink ports are connection points for SFP (small form-factor pluggable) modules that allow the switch to uplink to other switches using optical fiber cabling.

    Power over Ethernet (PoE) uses existing network cables to power connected devices, such as VoIP phones, wireless access points and surveillance cameras. If you need this functionality, look for a switch with Gigabit Ethernet ports that support PoE. Make sure the power per port (in watts) and the total power budget of the PoE ports meet the needs of your electronic devices.


    CompSource will educate and help make this process enjoyable and easy.

    Whether you're planning on using your network for basic home tasks or enterprise level security. You can tell our trained sales professionals your needs, and we'll make custom recommendations to suit your specifications and budget. Our reps have extensive knowledge and love to share. We educate, not sell, CompSource makes sure you buy what you need and not waste money on what you don't. As with every decision we never push, it's up to you when, and if you make a purchase.

    CompSource has a great technical staff that can help with a solution for your exact needs.

    Chat with us or give our professionals a quick phone call (800)-413-7361.



    I ordered my A4000 on Wednesday afternoon, and it was at my door by Thursday afternoon... And that's with the free ground shipping! Wow! I mean, I just got the shipping confirmation email today... The day after I received my order! Well done! I'm currently loving my new air purifier. Many thanks! Cliff D
    More Reviews

    eStores

    Connect With Us